Design + build / Custom interior

Custom Indoor Infrared Sauna

Interactive 3D sauna configurator

Open the published page to explore both models.

Dimensions & design review

Made for this room.

Built directly from your supplied bench plan. Dimensions are modeled as finished clear measurements; wall build-up must be confirmed on site.

53.5square feet
481cubic feet
108″ceiling height
Completed-project pricing

Option 1 — Custom carbon infrared (provisional): $47,650. Option 2 — Finnmark Spectrum Plus: $53,350. Option 3 — Spectrum Plus + Harvia Cilindro: $58,450. Clear cedar T&G ceiling is included. Add a Shou Sugi Ban black T&G ceiling to any option for $2,500; upgraded totals are $50,150, $55,850 and $60,950.

Bench layout
BenchLength × depthSeat height
Rear upper70″ × 18″38″
Rear lower54.25″ × 20″19″
Bench 3 / right upper92″ infrared / 66″ Cilindro × 15.75″38″

Cedar 2×4 slats on edge and paired 2×4 end frames match the container bench construction. Each bench has two end support assemblies, with no center legs. Upper supports are straight; lower front supports rake 8°. Bench 3 extends to the front wall in both infrared-only options; the Cilindro option uses a shorter 66″ bench to create the heater bay. The 54.25″ lower bench stops at the inside face of bench 3’s leg, leaving the space beneath bench 3 open.

Infrared packages

Option 1 is a custom carbon-only infrared package with provisional project pricing and a planned 240 V supply. Its final connected load (kW) and energy use (kWh) will be confirmed with the equipment quote; at continuous full output, each 1 kW of panel capacity uses 1 kWh per hour. Manufacturer, panel quantity, controls and suitability for this room remain subject to final equipment selection. Option 2 uses the Finnmark SP6X10 package: 17 Spectrum Plus panels, rated 5.95 kW at 240 V. Option 3 combines the Spectrum Plus package with a Harvia Cilindro PC110E 10.5 kW / 240 V electric heater, sauna stones, controls and cedar guard for infrared and traditional dry sauna bathing. Potential room temperatures: Option 1 targets up to 140°F provisionally, pending final equipment selection; Option 2 targets up to 170°F; Option 3 offers a controlled maximum of 194°F at the temperature sensor. These are design targets, not guaranteed room-wide readings. Actual temperatures depend on equipment sizing, insulation, ventilation and sensor position. Commercial operation will be capped at 194°F or a lower equipment or locally required limit.

Leave Infrared light mode off to see the cedar, tile and ceiling finish in clear lighting. Switch it on for a simulated dramatic red glow. Panel positions illustrate the proposed design; the final layout and controls will be coordinated for this room.

ADA specs in the viewer

Switch on ADA specs to explore the 60″ × 60″ turning envelope, 36″ arms and base, and 5.75″ overlap beneath bench 3. End-only supports leave the center bay open for knee and toe space.

Separate overlays show the lower bench dimensions and nominal 36″ outward-opening door. These are dimensioned design features for the final coordinated layout.

All designs and related intellectual property belong to Woods & Water Sauna Co.